48mm Universal Programmable Timer (Multi 8 or Multi 11)
Code: MULTI-8 AND MULTI-11
TECHNICAL FEATURES
* Sophisticated Microprocessor Design
* Multi-Function – User Programmable
* Wide Range Supply Voltages Or Single Voltage
* User-Set .01 Sec To 79 Hrs 59 Mins Ranges
* Output Status & Range Indication
* High Visibility 4 Digit Green LED Display
* Battery Provides Power For Off Line Setting
* Timer Operation Independent Of Battery Condition
OPERATIONAL FEATURES
Normal Mode: After power supply is on, timer controller is in normal operating mode. To view ON time, time range, OFF time or mode, press 7, 8, 9 or 10 buttons respectively. Note timer continues its operation while various set points are viewed or set up.
MODE IDENTIFIER
1) D.O. DELAY ON: Relay operates after pre-set time period
2) D.I. DELAY INTERVAL: Relay operates immediately for pre-set time period
3) C.T.A. CYCLIC TIMER: Relay continuously cycles “OFF” and “ON” for pre-set time period
4) C.T.B. CYCLIC TIMER: Relay continuously cycles “ON” and “OFF” for pre-set time period
5) P.C.T.A. PROGRAMMABLE CYCLIC TIMER: For Multi attempt start up applications. Relay cycles “OFF” then “ON” for up to 9999 attempts (REPEAT TIME)
6) P.C.T.B. PROGRAMMABLE CYCLIC TIMER: Relay cycles “ON” then “OFF” for up to 9999 attempts (REPEAT TIME)
7) D.R. DELAY TO RELEASE (11 pin only): Relay operates when external start contact is closed, timing commences when start contact opens. If start contact is closed again, timing returns to zero, relay state is unchanged. At the end of the pre-set time, relay operates
8) D.I.L. DELAY INTERVAL LATCHED (11 pin only): Relay immediately operates for pre-set time period after external start contact is closed. Timer resets after pre-set time period if start contact is open